Accessibility
  • Adjust Font Size:
  • A
  • A
  • A
Maintenance Free Poles

RS poles require no scheduled maintenance, like preservative treatments or repainting, resulting in significant operational savings. Inspections are faster and non-invasive and typical pole replacement frequencies are cut in half. Even hardware re-tensioning is required less often because RS poles have a similar coefficient of expansion to that of steel hardware.


M1

M2

M3

M4

M5

M5/6

M6/7

M7

M8/9

M10/11

M1L

  • RS Pole Code Imperial
  • RS Pole Code Metric
  • Pole AGH ft. [m]
  • Weight lb [kg]
  • Tip OD in. [cm]
  • Base OD in. [cm]
  • Base Plate OD in. [cm]
  • -
  • -
  • -
  • -
  • -
  • -
  • -

Note: The RS pole selector is based on CSA Grade 2 construction with a maximum AGH deflection limit of 22% at class load for tangent and self supporting poles with line angles ≤3°. The M5/6 is not shown in the module tree as it is a base only module that stacks under the M4. The AGH shown is based on a standard embedment assumption of 10% of the pole height plus 2 ft. [0.61m] for poles 40 ft. [12.2m] and over and 10% plus 2.5 ft. [0.76m] for poles less than 40 ft. [12.2m]. The RS pole selector is for demonstration purposes only. Contact RS to confirm the correct pole for your application.